Tee PVC Fitting Mould
- Tee PVC Fitting Moulds of High Quality
- with Best Price from Chinese Manufacturers
- Tee PVC Fitting Moulds at Low Prices
- We deliver fast and offer cost-effective deals
- We strictly control the quality of our moulds
- Go4Mould designs following customer drawings or samples.
|Nos of Cavity
|Hardness of Cavity & Core
|Hardness of Wear Parts
|Core pulling system
|Motor /oil cylinder/ stripping plate, angel pin…etc
|DME/HASCO Standard …
|In core baffle cooling and in cavity plate chain drilling type cooling
|Cold or Hot
|30 work days
For You We Offer A Wide Range Of PVC Pipe Fitting
Tee PVC Fitting Mould
GO4Mould has a reputation to maintain and adheres to the business principle of quality in its Tee PVC Fitting Mould. Multiple patents are obtained by our company, which establishes a solid basis for future growth. Quality is the guarantee of the company’s existence, and customers are the condition of the company’s existence. Whenever possible, Go4Mould tries to eliminate mistakes or shortcomings that might occur as a result of Tee PVC Fitting Mould design, anticipates problems and solves them. All we want to do for our buyers is to keep them up-to-date on the latest developments in this highly competitive industry & factory.
We have created an FAQ guide to help you understand the importance of moulds. It will enable you to gain a deeper understanding of the product and its manufacturing process.
1. What is a Tee PVC Fitting Mould?
Fittings with a T shape are known as Tee PVC Fitting Moulds. This device has two outlets at angles of 90° each and a main connection line. Normally, it is used to connect pipes at 90° angles and has adjacent outlets. Pipe tee fittings are used in both commercial and industrial applications.
Figure 1: Tee PVC Fitting Mould
2. What is the Purpose of Tee PVC Fitting Mould?
Tee PVC Fitting Moulds are fittings with three ends; two in a straight line, and one at a 90-degree angle on the side. Tees connect two lines at 90 degrees to allow a line to be split into two parts. Similarly, tees can connect two lines together. These parts are also commonly found in PVC structures. Tees are incredibly versatile fittings and are among the most widely used parts in the plumbing industry. Typically, the ends of tees have slip sockets, but threaded versions are available as well.
3. What Material is Used to Make Tee PVC Fitting Mould?
T-shaped steel tees have three branches, usually one with equal tees and one with reducing tees (tee reducers), both of which are used to divide (combine) pipelines in order to adjust the flow rate and direction.
It has been widely used in a variety of industries. There are various types of steel pipe tees, depending on the material:
- Stainless steel
- Carbon steel
- Alloy steel tee
4. Define the Tee PVC Fitting Mould Manufacturing Process
Tee is manufactured by the hydraulic Bulge method. In the hydraulic die, a piece of pipe is cut and liquid is poured inside; hydraulic pressure pushes the branch out through the opening of the die. This method gives a smooth finish. This cannot, however, be used to produce thicker tees.
Figure 2: Hydraulic Bulge Method for Tee PVC Fitting Mould
5. When Connecting Tee PVC Fitting Moulds, How Do You Do It?
For connecting PVC pipe to Tee PVC Fitting Mould:
- Slide a segment of PVC pipe into one of the ports of the Tee fitting.
- Place the pipe inside the Tee and push or tap until the stop is reached.
Figure 3: Tee PVC Fitting Mould
6. What is the Process for Assembling a Tee PVC Fitting Mould into Cement?
In order to ensure permanent and strong connections, it is recommended to use PVC cement when attaching the PVC pipe and Tee PVC Fitting Mould. Temporarily connecting this fitting can also be accomplished with a threaded screw inserted through where the pipe meets the fitting.
WARNING: PVC cement is permanent, and the PVC pipe cannot be removed from the fitting after 30 seconds. To ensure that all pipes are correctly cut, perform a dry fit. After seating, if necessary, you should make sure all your items are squared.
The PVC cement process consists of the following steps:
- STEP 1
Apply a thin layer of PVC cement to the inside of the fitting only, using the PVC cement dauber inside the can. Place the cement only on the pipe and fitting where they will come into contact.
- STEP 2
Make sure that the pipe is seated properly in the fitting. Make sure that it impacts the detent. Make sure the pipe and fitting are square, if needed, and hold them together for 30 seconds.
- STEP 3
Make sure that you wait at least two minutes before putting weight or pressure onto the pipe/fitting connection. By doing so, the chemical weld will cure. As the cure time passes, you can connect other fittings to the structure.
7. What Can you Do to Promote the Quality of the Tee PVC Fitting Mould?
The Tee PVC Fitting Mould company promotes innovation, vigorously develops new products, and actively works to provide consumers with the best solutions to meet their needs, contributing to both enterprises and consumers’ success.
8. Mold Support Provided by Go4Mould
We are happy to answer any questions you may have after reading this guide. With information provided by users like you, we are constantly revising our documents and website.
Contact us by email at email@example.com if you have any questions or suggestions.
9. How Can I Place an Order?
We have three easy steps for placing an order at Go4Mould:
- Visit the website
- Click “Contact Us”
- Request a quote for replacing your order
Go4Mould offers free market competitive quotes within 24 hours when you submit your Tee PVC Fitting Mould drawing or requirements.