Mass production availability of mould bases
The precise production and design of your injection mold base allow them to cope with mass production. We have seen a lot of mould bases getting damaged and not being sufficient for heavy manufacturing because they are not built accordingly. On the contrary, Go4mould highly lays stress on the effective basis (designing) so that you can handle the massive orders at a cheap price.
Versatile and smooth mould base finishing
Our injection mold base is not just confined to one type of surface finishing. Rather, it is changed according to the mould base part or mould base product you need by the end. For instance, if the surface of the mould part is to be kept rough, we design the inner surface of the injection mold base so that they give a rough texture. A similar operation goes for the smooth surface and other surface requirements.
Mould base cavities and their benefits
You might not be truly familiar with the role of cavities in the injection mold base that’s why you may have been demanding simple mould base cavities. Keep in mind that more complex cavities result in more production and better design but it is not a compulsion. Go as your budget allows you and gradually move towards complex designs. After all, we care about you!
Easy on the budget plastic mould base
Budget indeed is the most important asset while running or starting a business venture. One wrong investment can ruin the years of growth. That’s why Go4mould has a business orientation team that helps you invest in valuable products. Our injection mold base is highly competent and costs less than the services you can have out of them. you’ll see a gradual decrease in your expenses by investing with us!
Diverse injection mould base
There are different kinds of injection mold bases that serve different purposes. Sanity is not in choosing all the types for your venture but a valuable and effective one that’ll add to the profit of your company. We offer the following diversity in our injection mold base.
Special mould base
Standard mould base
Injection mold base expert
- Factory View
- Technical data
|Mould base||SD,LKM Standard, HASCO Standard Self-made, etc.|
|Mould Life||50-500K shots|
|Mould Cavity||Single cavity, multi-cavity|
|Runner system||Hot runne system and the temperature control system|
|Gate type||Pinpoint Gate, Edge Gate, Sub Gate, Film Gate, Valve Gate, Open Gate, etc.|
|Plastic material||ABS+PC,ABS+PVC, PP+EVA, PP+LDPE, PE+PP, PE+PE, PE+PB ,PE, PP ,PA ,POM ,PC,etc|
|Metal material||Aluminum (6061,6063,7075…),Brass, Copper, Brass,Satinless Steel(301,302,303,304…)|
|Surface treatment||Polishing,Painting,Chroming,Anodizing, Brushing, Silk Screening,Water Transfering, Laser Cutting,Leather Covering,Texture,Sanblasting,Gilding, UV Painting…|
|Pls provide||2D, 3D, samples, or the size of the multi-angle pictures|
Go4mould proposes solutions for various needs
FAQ– Injection mold base
We offer three basic injection mold bases that are mould plates, special base, and standard base. However, there is always room for your customized solutions. If you think a different kind of base would better suit your industry, then you can show us a sample, or simply give instructions to our engineers and they’ll make one for you. We have the latest technology that lets you manufacture your dream injection mold bases.
We highly encourage buying used injection mold base or spare parts in the early stage of your business. This helps in getting your feet strong in the market and side by side you can work on the other things that cost money such as marketing etc. Go4mould provides a used injection mold base at reasonable rates which can satisfy you with the quality as well. Later on, you can shift to our first-hand injection mold base for better working and profit per month.
Yes, getting your meeting fixed with our business analysts is our prime goal. We believe that no project can reach its good ending if the client-business relationships are not well-maintained. By direct contact, you can talk about the minute details more openly. Ultimately, you will get a more strategic approach towards running your business. In case of any help, you will always find us by your side.
Other than mould’s base, we provide you with the unmatching quality of
- Hanger moulds
- Bucket moulds
- Cable tie moulds
- Fitting moulds
- Plastic injection moulds
- Polymer moulds
- PVC moulds
And another set of spare parts or CNC machines, or finished products. Our product area is filled with huge choices to select a better option for your business enterprise.
Yes, our manufacturing area is spacious enough to accommodate hundreds of production lines at the same time. It is spread to 40 plus square meters and is the result of our undying efforts. We have a huge area to store your products as well. The environmental conditions are kept according to the injection mold base requirements so that you don’t get any damaged product on our part.
Go4mould is highly against toxic materials because they cause environmental pollution during the manufacturing system and leave chemicals in the air while disposed of. We choose to make your injection mold base with eco-friendly products which do not harm the environment in any way. You can rely upon them for their hygienic nature and reaction-free properties against extreme weather.
Of course! The main purpose of our customer services staff is to help you out in the product selection process. Clients often become dubious about the injection mold base selection because of the cool set of qualities we offer in them. Our educated staff then highlights the fine line between each product so that it becomes easier for our customers to buy the most relevant injection mold base for their industry.
Other than on-site selection, you can also choose your injection mold base online. We can arrange a skype call or WhatsApp video call and showcase our gallery. Our instructor will guide you side by side, just like the on-site experience.
Why not! We have grown to this position just for being able to convert the custom choice of the clients into reality. Email or whatsapp us your requirements or meet us live. We will have your personalized injection mold base ready within the desired premises of your samples.
There are a lot of reasons why you should choose us in your business journey.
- First of all, we have a lot of experience than any other seller in China
- Our workforce is well educated and competent
- Strict regulations are followed in our construction area
- Less than no manual aid is required in the production process of your injection mold base
- We run quality inspection that is necessary for the mold well-being
- We offer maintenance and after-sale services
Cutting the long-short, if you look into our profile, you will get a lot of reasons to invest in our company.
Yes, Go4mould is a registered trademark of national and international levels. Its company’s head office is based in China with different off-shoots in 35 to 40 different countries. You can avail of our services at every corner of the world.
There are not as such device-bounding or strict requirements for placing the order. if you get on the instant quote pop-up it’ll take you to the form-like page where you will have to add some information regarding the order, type, delivery time etc. The moment you get these sections filled, you receive a call or a message for order confirmation.
The reviews of our clients
I am super happy about the type of response I have received. I had a customer behavioral issue previously and Go4mould has sorted that out for me. The company environment is so friendly and the staff is readily available for their courteous services. All the discussions and dealings take place with a polite temperament which is a good go for me!Alex Charlie:
Online scam is the biggest turn off for me. Being far off from the industries where you cannot go on your own, online dealing is the best but some manufacturers deceive. One of my friends recommended Go4mould to me, I was quite reluctant to try their services but I was surprised by the results. I ordered hanger moulds and they were manufactured in time, with premium packaging and optimal quality. A huge thumbs up to their efforts!Betty Grey:
I started a new business venture a few months ago and I was looking forward to minimum quantity orders. No supplier was ready because apparently, they didn’t wat to waste time for less profit. However, I read about Go4mould online and was intrigued to know that they offer MOQ services no matter how small the order was. I was delighted by their services and happy to knew that they supported new commers like me.Arthur Red:
My company runs a mediocre plastic cup business and we needed moulds on an urgent basis. As summer is the peak season of the drinks and cups are more often utilized. All the slots were booked and manufacturers were really busy! It was then Go4mould took our back and manufactured the moulds for us on an urgent basis. I sincerely recommend their services!Fred Adison:
Are you looking for more information or would you like to get an accurate quote?
If you need a professional mould maker partner to provide you with a high quality, cost-effective, timely and risk-free manufacturing service. Go4mold is your first step towards success.
Injection mold base: a concise overview
The injection mold base is a generic term for the pieces that hold the cavity for the plastic injection mould and also serve to connect the mould to the injection moulding machine.
GO4mould specializes in the production of injection mold bases that can be customized. Custom plastic injection moulds, precision machining, injection moulding, and product assembly have always been a priority for us. We have a highly experienced engineering team and are a recognized specialist mould manufacturer both locally and globally.
The injection mold base
The injection Mold base is a collective term for the components that hold the cavity for a plastic injection mould and also serve as a primary link between the mould and the injection moulding machine. Although the individual components of a mould base were previously built and manufactured as needed, standard injection mold bases have lately gained widespread acceptance and are now used all over the world. Even now, large-scale moulds and small-scale moulds are built separately for each mould. Although injection mold base standards were developed in metric units in China, they are still developed in inch units in the United States. It is typical in Europe, as well as China, to prepare them in metric units.
Figure 1: Standard Injection Mold Base
Injection mold base parts
The injection mould base consists of these common parts:
- Clamping plates
Two or more metal plates make constitute a mould foundation. All of the internal aspects of the mould are held in between these plates, which are referred to as clamp plates. The ejector plate is supported by pillars on the bottom clamp plate, which sits on the insert moulding machine table. The nozzle of the machine will push down on the top plate to accept the plastic resin. When the mould opens and closes, this is the dividing line.
- Sprue Bushing
The sprue bushing is a foundation component of an injection mold base that allows molten plastic to enter the mould and start its journey to the cavity image. The sprue bushing serves as a conduit for the plastic resin to flow into the mould’s cavity and core.
- Runners and Gates
When molten plastic is injected into the mould, it enters through the sprue bushing and must be guided to the cavity image through the runner system and gates to produce the completed product. The runner acts as a passage into the mould base’s face. The gate is at the end of the runner system, which is intended to enable molten plastic to reach the cavity at the right speed and quantity to fill it in a disciplined way.
- Cavity Image
The cavity image represents the form of the final molded object when melted resin pours into the core and cavity plates. The cavity is loaded with the plastic resin that gives the item its final shape.
- Ejector Plate and Pins
The ejector plate is a movable component that aids in the removal of the molded product from the cavity. The plate has pins knowns as ejector pins attached to it that fit through the rest of the mould and gently push the final portion up. The plate holds the pins together, allowing them to lift all at once. At the end of the injection molding cycle, ejector pins are utilized to force or eject the final product from the mould.
Types of structures for plastic mold base
For the construction of a injection mold base, the following two types of structures are the most typically utilized.
- Two plate mould structure
The technique of the gate used determines which of the structures is chosen. The two-plate construction is typically employed in the case of a side gate or tunnel gate.
- Three plate mould structure
The three-plate mould structure is usually employed when using a pinpoint gate construction.
Materials used for injection mold base
The mould is generally made of carbon steel, and the mould base, ejector housing, and clamp plate can all be made of the same material. Carbon steel is easily machinable to the desired size. Carbon steel is commonly utilized for machine construction and is employed in non-hardened circumstances for the constituent sections of the mould base. Aluminum mold bases can also be used in particular applications requiring high strength. A injection mold base is generally utilized in conjunction with accessories such as guide pins, guide bushes, return pins, and so on.
Injection mold base material requirements
The first requirement of the injection mold base material is to provide good corrosion-resistant, which generally increases the life of the base. The mold base material must have good machinability characteristics so that it can easily be machined to the required size. The material should have good heat transfer. The material should be low-cost in order to boost overall production.
Go4mould injection mold base: benefits
- Made of high-quality materials that provide better value for your money, metallurgical uniformity, and reliability.
- Made with the most modern, precise machinery and quality control checked to ensure consistent performance.
- Increases productivity by up to 40% by giving designers greater freedom and flexibility, as well as more time to dedicate to the genuinely creative parts of die and product creation.
- Mould base plates and components are pre-engineered to provide you with the cost and performance advantages of interdependency.
- Readily available as per requirements. They are always available for same-day delivery. Our worldwide infrastructure of Service Centers ensures that you have access to the goods and people you need to save time, energy, and money.
Go4mould – china’s top plastic injection mold maker
We are Go4mould, a reputable injection mold base manufacturer with over 20 years of experience in China. We offer a diverse selection of goods for a variety of sectors, including electronics, automotive, medical, and others. Our injection mold bases are comprised of high-quality materials and are built to fulfil the most stringent quality and safety requirements. All of our moulds and products have a one-year warranty. Go4mould is the best choice for you if you’re seeking a dependable and reliable mould base maker. Contact Us and get a free quote within the minimum time.